TileRific

Porcelain tile is an off white tile that generates a more muted or artistic color reproduction. It is a non-porous tile, impervious to freeze/thaw conditions. Recommended for all water applications. You may use standard adhesive recommended for porcelain tile. Sanded or un-sanded grout may be used.
Tiles can be cleaned with any household non-abrasive cleaner and a soft cloth or sponge.

Porcelain Tiles 4.25"x4.25"
Porcelain Tiles 6"x 6"
Porcelain Tiles 12"x12"
#BS_____

Glossy Tile

This ceramic Glossy tile provides a brilliant canvas for best artwork and photo reproduction. Susceptible to scratches and not recommended for surfaces which require frequent cleaning. Best used as decorative only. Grouting not recommended.

Glossy Tiles 4.25"x4.25"
Glossy Tiles 6"x6"
Glossy Tiles 8"x10"
Glossy Tiles 12"x12"
#BS_____

Before After

Textured Wall Tile

This Textured wall tile is a rustic, matte, ceramic tile with a unique near-stone, textured finish. You may use any commercially available adhesive for ceramic tile. We recommend un-sanded grout. You may use any commercially available ceramic sealant without damaging the image. These tiles may be used for outside installations ONLY where freeze/thaw is not a factor. Tiles can be cleaned with any household non-abrasive cleaner and a soft cloth or sponge.

#BS_____

Before After

Matte/Satin Finish

This ceramic Matte/Satin finish tile is a highly resilient and scratch resistant wall tile. Recommended for vivid photo and art reproduction. You may use any commercially available adhesive for ceramic tile. We recommend un-sanded grout. These tiles may be used for outside installations only where freeze/thaw is not a factor. Tiles can be cleaned with any household non-abrasive cleaner and a soft cloth or sponge.

Matte Tiles 4.25"x4.25"
Matte Tiles 6"x6"
Matte Tiles 8"x10"
Matte Tiles 12"x12"
#BS_____

Textured Glass Tile

Textured glass tiles are the first dye-sublimation tiles to meet and exceed ASTM tests set forth by ANSI standards for commercial and residential floor and wall applications. Images are applied to the backside of the glass to protect the dyes from wear and abrasion.
Tempered glass tiles cannot be cut, so for applications where cutting is necessary (corners, holes, etc. in floor installations), you would order non-tempered tile. Tempering is added to the larger tiles for strength. The 6" x 6” tiles met the ANSI and ASTM standards above without tempering. The 12" x 12" tiles are offered in tempered and non-tempered. For the 12" tile installations, you would want to use the tempered tiles except where cutting is needed. Image the non-tempered tile prior to cutting, as pre-cut tile may fracture during pressing. The non-tempered tile may be cut with a glasscutter, or a tile saw (wet saw application, new diamond blade) or using a water jet cutting service (check your local vendors). We recommend using an Epoxy Thin-Set mortar in white for mounting the textured glass tile in any application. This adhesive should be readily available in most areas, and has exhibited superior bond strength without damaging the Single Step white backing on the tiles. You should use a grout specifically formulated for use with glass tile. Tiles can be cleaned with any household non-abrasive cleaner and a soft cloth or sponge.

Textured Glass Tiles 12"x12" white back-tempered
Textured Glass Tiles 12"x12" white back-non-tempered
Textured Glass Tiles 6"x6" white back
#BS_____

Smooth Glass Tile

Smooth glass tiles have a frosted backing, and are for decorative use only - in tile stands or framed pieces. The tile is translucent, and can be used in lighted applications. If you wish to frame your tile, you should spray the back of the tile with white primer after sublimation to give it opacity.

Smooth Glass Tiles 4" x 4"
Smooth Glass Tiles 8" x 10"
Smooth Glass Tiles 6" x 8"
#BS_____

Dura Satin

This Dura Satin finish ceramic tile has the resilience and scratch resistance of the matte tile, but with a semi-gloss finish similar to the color reproduction and texture of the glossy tile. These tiles may be used in backsplashes, showers, or wall murals in any room in residential or commercial buildings. However, they are not recommended for floor or countertop applications. You may use any commercially available adhesive for ceramic tile. We recommend un-sanded grout. Tiles can be cleaned with any household non-abrasive cleaner and a soft cloth or sponge. These tiles may also be used for outside installations out of direct UV exposure and only where freeze/thaw is not a factor.

Dura Satin Tiles 4.25" x 4.25"
Dura Satin Tiles 6" x 6"
Dura Satin Tiles 8" X 10"
Dura Satin Tiles 12" x 12"
#BS_____

Before After

Tumbled Stone

Tumbled Stone tile is a flat stone finish that presents any art or image in an old-world fashion. The tiles are very porous and must be sealed if used in water applications such as showers or backsplashes. Tumbled Stone is a compressed sandstone product. Each tile is individually cut, causing some variation in color, texture, size and thickness. You may find chipped edges and corners missing on various tiles. When using tumbled stone for murals, we recommend that you lay out your tile prior to pressing, selecting those with missing corners for outside tile and selecting for the tile that would best suit your artwork. You may use standard adhesive recommended for tumbled stone tile. Sanded or un-sanded grout may be used.

Tumbled Stone Tiles 4" x 4"
Tumbled Stone Tiles 6" x 6"
#BS_____

Glossy Mosaic 2" Tiles
9 tiles per sheet

Per Case: 60
Price Each: $

Case of 60 Sheets, 9 Tiles per Sheet, 2" x 2" Ceramic Glossy Tiles
#BS_____